304 vs 316 Stainless Steel for Fittings and Plumbing Parts
Manufacturer: JADE (China) / Contact: P-JOINT
The two most common stainless steels for fittings and plumbing parts are 304 (SUS304) and 316 (SUS316). Both are austenitic "18-8" types and look almost the same, but their composition differs.
Composition
| 304 | 316 | |
|---|---|---|
| Main elements (approx.) | Chromium about 18%, nickel about 8% | Chromium about 16 to 18%, nickel about 10 to 14% |
| Molybdenum | None | About 2 to 3% |
The molybdenum in 316 improves resistance to pitting and crevice corrosion caused by chlorides such as salt.
How to choose
- 304: widely used for ordinary water, beverage and food contact. Easy to machine and usually cheaper than 316.
- 316: considered for salty environments, chlorine-based cleaners or sanitizers, or when stricter corrosion resistance is needed.
- 316L: a low-carbon type, sometimes chosen for welded parts.
What to check
- What the part touches: type of beverage (acidic, salty), water quality, cleaning agents.
- Where it is used: indoors or outdoors, near the sea.
- Budget and quantity: 316 usually costs more in material.
- Whether your equipment design already specifies a material.
The final choice is best made after checking the operating conditions. We work to drawings, so if you write the material (304, 316 and so on) on your drawing, we make it as specified. If it is not decided, tell us the application, beverage and cleaning agents. For stainless versus brass, see this page.
Request a quote
Email us the size, quantity and whether you have a drawing. We will reply with lead time and a quotation.