NPT, BSP and PT Threads: How to Tell Them Apart
Manufacturer: JADE (China) / Contact: P-JOINT
Pipe fittings that look alike can use different thread standards. NPT (US), BSP (British, ISO 7 / R and Rc) and PT (the Japanese tapered pipe thread) are easy to confuse.
Basic differences
| NPT (US) | BSPT / ISO 7 (R, Rc) / PT | |
|---|---|---|
| Standard | ANSI/ASME B1.20.1 | ISO 7-1 (BSPT); PT corresponds to R and Rc |
| Thread angle | 60° | 55° |
| Taper | 1/16 | 1/16 |
PT is the name used in Japan for the tapered pipe thread that corresponds to the R and Rc threads of ISO 7-1.
Threads per inch differ for some sizes
| Size | NPT | BSPT / PT |
|---|---|---|
| 1/8 | 27 TPI | 28 TPI |
| 1/4 | 18 TPI | 19 TPI |
| 3/8 | 18 TPI | 19 TPI |
| 1/2 | 14 TPI | 14 TPI |
Even when the pitch is the same (for example 1/2), the thread angle differs, so the two are not interchangeable. Forcing them together can cause galling and leaks.
BSPP (G) is different again
The G thread (BSPP) has a 55° angle but is a parallel thread (no taper) and seals with a gasket or O-ring. It is a separate standard from the tapered NPT and BSPT threads.
When connecting to imported equipment
- Check the thread standard (NPT, BSPT, BSPP and so on) in the equipment specification or markings.
- If you are not sure, send us a physical sample and we will make the part to match it.
- If the standards do not match, we can make a custom part with the thread you specify on the drawing.
We work to drawings or samples only. Please write the thread standard, size and male/female on your drawing so that quotation is quick. See also how custom orders work.
Request a quote
Email us the size, quantity and whether you have a drawing. We will reply with lead time and a quotation.